|
Castle Card Access Control Systems
As you all may be aware that most of
the Castle Systems that your side is using may be obsolete. Service for the
system is getting harder and many system integrator is proposing client to
replace their system. We are please to informed that Securitex still carry some
spares for this obsolete system and if you need them please do not hesitate to
contact us to check on the availability. Our engineering team is also familiar
with this very old system and may be able to advise client on the system and
Castle software.
Castle Access Control System is manufactured
by CASS Malaysia.
We carry some of the Castle Equipment
namely Castle Eguard. Castle Elevator Control Castle 2SL and CTR-16 relay board.
Castle Reader Interface. Castle PC interface. Castle Smartguard software. Castle
2, 4 and 8 door controllers as well.
Below you can download the documentation you
needed.
Castle EGuardv1.5 manual
Castle EGuardX_M V 1.9
Castle EGX relay V1.2
Castle Elevator Access Series SL Brochure
Castle Elevator CTR16 relay Configuration V1.2
Castle Elevator Floor Selection Panel
Castle Elevator SL Configure v1.2
Castle Elevator SL Diagram V1.0
Castle Network Door Access S Series Brochure
Castle Reader Interface S K Series RDR INT V1.2
Castle S K Series Configuration v1.2
Castle S K Series CTRL V1.2
Castle S K Series RDR Programming v1.0
Castle Smartguard CS v5.6 manual
Castle Smartguard software brochure
Updated in 2016
Securitex Castle ES Carpark System Configuration v1.2
Securitex Castle ES Carpark System Controller Configuration v1.2
Securitex Castle ES Carpark External Relay Configuration v1.0
Securitex Castle ES System Configuration v1.2
Securitex Castle ES Controller Configuration v1.2
Securitex Castle ES Reader Interface Configuration v1.2
Securitex Castle iCASS System Configuration v1.2
Securitex Castle iCASS Controller Configuration v1.2
Securitex Castle iCASS Door Interface Configuration v5.0
Securitex Castle iCASS Reader Interface Configuration v1.2
Securitex Castle iCASS Reader Interface Wiegand26 Configuration v1.2
Securitex Castle S Series System Configuration v5.0
Securitex Castle S Series Controller Configuration v5.0
Securitex Castle S Series Reader Interface Configuration v5.0
Securitex Castle S Series Reader Interface Programming (Standalone / Emergency
Mode) v5.0
Securitex Castle ScanX Configuration Diagram v1.4
Securitex Castle ScanX Controller Configuration v1.0
Securitex Castle ScanX Reader interface Configuration v1.2
Securitex Castle ScanX Interface & Relay Configuration v1.1
Securitex Castle SL Lift Access Control Configuration v1.2
Securitex Castle SL CTR16 configuration v1.0
Securitex Castle SL Lift Access Control Diagram v1.0
Securitex Castle SL Lift Floor Selection Panel
Hope the above document will assist you to
maintain your Castle access control system. if you have any other request please
feel free to contact us.
@ 1997 - 2023
All Rights Reserved
Securitex Electronic Systems Engineering
Block 9010 Tampines St 93 #04-145 Singapore 528844 Tel:67852171 Fax:65850107
|