 Securitex |
|||
|
|
|||
 Transmitter image
|
(Elevator Security Division) Securitex Elevator wireless transceiver. Model SEWT-01 uses a very high frequency (2.4 GHZ) to transmit real-time wireless video signal to a receiver. This transmitted signal can reach a maximum height of 150 metre which is equivalent to a 40 story building. With this SEWT-01 installed, elevator surveillance camera need not use any coaxial cable anymore. This not only save thousand of dollars but system can be implemented in troubled elevator within hours rather than days. Furthermore voice recording is possible.
How is the SEWT-01 installed
in the elevator? The TX-01 is install at the elevator car top. A dome colour or black & white camera is than install in the lift car ceiling facing the elevator door. The camera and the TX-01 takes it power from the12VDC rechargeable power supply unit by plugging the power supply system to the 230VAC power socket which is available on all elevator car top.
A coaxial cable is than plug into the video output and the other end of the cable is plug into a monitor and recorder or a Digital Video Recorder 65-67852171 email: sales@securitex.com.sg
|
 Regulated power supply c/w charging circuit and rechargeable battery
Receiver and transmitter together with the power system | |
The RX-01
is than install at the lift motor room (a suitable location need to be
selected for optimum quality). The RX-01 takes it power from the
12VDC rechargeable power supply unit by plugging in the power supply system to
the 230VAC power socket which is available on all elevator motor room.
